Tired of having branches and twigs smack your windshield head-on when going through those super tight trails? Limb risers help provide you a solution to help guide the branches and other low hangin...
SPECIFICALLY DESIGNED FOR MAXTRAX PINSDo you always have a hard time opening or closing your Maxtrax Pins with just your fingers? Especially when its cold, muddy, dirty, or too tight? These new pin...
Through popular request I have available just the lower mounts for our limb risers. Available only for the 2016+ Tacoma and 5th Gen 4Runner (More models soon to come)
Brackets are made from .074" S...
2 Left in Stock!We designed a hard mount for your new Dometic Go water jug so it doesn't go bouncing when your on those bumpy trails!
Built from 1/8 aluminum, only available in a powder coated matt...
4 Week lead timeWe designed a hard mount for your new Dometic Go water jug so it doesn't go bouncing when your on those bumpy trails!
Built from 1/8 aluminum, only available in a powder coated blac...
4 week lead time*Fits 3rd gen Tacoma's onlyDoes not fit access cab models
If you need expanded storage space inside your Tacoma, we have the largest overhead molle storage for the backseats of your...
After a few customer's came in with bent frame mounts for their front bumper, we went ahead and developed our own front bumper reinforcement plate. The plates are 3/16 steel and will weld directly ...
4 Week lead time
These recovery board mounts were designed to maximize the storage space of your roof rack, while also providing some aerodynamic advantage instead of having a big flat box on the f...
This New Holland Overland patch is made from high-quality PVC, and the backing is hook and loop (Velcro). These are a limited run! Once they are out of stock they are done and a new design will begin.
This mount is perfect to cleanly install a HAM/GMRS antenna right off of your ditch light brackets.Compatible with any brand of ditch light brackets
This mount is not intended for LARGE antennas.
D...
Lead time is 4 weeksExpand your mounting space inside your vehicle with our door molle panels for the 3rd Gen Tacoma. You can mount flashlights, pocket knives, first aid kits, radios, standard moll...
This is our universal 20"x24" molle panel. Designed to fit Rotopax or your Joolca hot water heater, or use it for your DIY project on the side of your trailer or rig to mount whatever you need! The...
In the overland space, a koozie is a practical accessory designed to keep beverages cold while adventuring off-grid. Made from an insulating neoprene, it helps maintain drink temperature and preven...
These mounts are 3D printed SLA and are specifically designed to fit the Midland radio handhelds to your RAM arm (1" Ball).Mounts come in grey
Available as a direct mount, or ball mount
BUILT TO ORDER - MADE IN USA
*Can ship to CANADA. Please email us for custom invoice
**IMPORTANT - New hitch extension orders will not include a recovery point. Disregard in photo's. Looking to add...
Designed to fit on the side walls of your Alu-Cab, but these can be used anywhere you'd like! Size: 42.5" x 11.25"
*Aluminum panel comes raw**Does not include hardware, customer is responsible for ...
Help identify important safety features in your rig or trailer.
Available in 1.5" and 2" sizes
.074" Stainless Steel - Tumbled
Comes with VHB backing tape for quick
*Custom designs also avail...
We know with some unique builds that you want to add some limb risers and need some custom length cables! Our cables are made from aircraft grade gable and stainless steel eyelets, heat shrinked to...
COMING SOON! Small batch Pre-Sale available now
Description:
The Spare Tire Gear Mount! Designed to maximize your vehicle's storage capabilities, this mount allows you to securely attach essential...
This tool is designed to fit around the threaded collar for KING SHOCKS 2.0 threaded bumpstops. Stop damaging and ruining your nice blue anodizing from smashing a flathead and a hammer to adjust an...
COMING THIS SPRING
Brand new design for our universal antenna mount! Now includes a new mount to fit right onto any 8020 crossbar, and built with a more durable stainless steel construction. Our ne...
This is our Spare Tire Gear Mount Accessory Shelf. Designed specifically for our gear mount, this gives you additional storage space mounted directly to your spare tire!
Dimensions: 32"x16"
1/8 Al...
MADE TO ORDERThis mount was designed specifically to wall mount your diesel heater. Whether its in your Four Wheel Camper, garage, or truck camping system like a GFC this will give you a sturdy mou...
COMING SOON!
Tired of having branches and twigs smack your windshield head-on when going through those super tight trails? Limb risers help provide you a solution to help guide the branches and oth...
This mount is perfect to cleanly install a secondary ditch light onto your existing ditch light brackets.Compatible with any brand of ditch light brackets
This mount is not intended for LARGE light...
COMING SOON (February 2025)Here at NHO we designed an 11lb propane tank mount for off-road use that is rugged and durable. Designed to securely hold a propane tank on vehicles navigating rough terr...
Are you looking for a vertical low profile way to mount your road or mountain bike? Combined with in house manufactured parts, and parts from leading companies we put together this low profile kit ...
Lead time is 4 weeksExpand your mounting space inside your vehicle with our door molle panels for the 5th Gen 4Runner. You can mount flashlights, pocket knives, first aid kits, radios, standard mol...
Lead time is 4 weeksExpand your mounting space inside your vehicle with our center console molle panels for the 3rd Gen Tacoma. You can mount flashlights, pew pew's, pocket knives, first aid kits, ...
Represent our great North America with our "North American Exploration Vehicle" windshield banner! This is perfect as it involves both the great USA and also our friendly Canadians as well! Heading...
3+ week lead time (Powder coating adds 1-2 weeks)*These are all hand built and are custom fit to your vehicle.**Spare Tire Swingouts are Non-Refundable
Local pickup at our shop only (Holland, MI)SH...
**LASER CUT PARTS ONLY**These are for you DIY-ers that wanna build your own rear bumper! Using 1.75" Round Tubing for the rest of the bumper, with a 2x2" square tube hole for reinforcing your hitch...
Biggest Roof Top Tent Soft-Shell for 6 adults, the Walkabout series offers LST, huge side windows, massive bed comfort, and easy setup for all the crew.
DESCRIPTION
The 23ZERO Walkabout 87 is the b...
Best soft shell rooftop tent for 4 people, the Walkabout series offers LST, huge side windows, cal-king sized bed comfort, and easy setup for adventurers.
DESCRIPTION
The 23ZERO Walkabout 72 is the...
Best roof top tent soft shell for 3 + people, the Walkabout series offers LST, huge side windows, queen size bed comfort, and easy setup for adventurers.
DESCRIPTION
The 23ZERO Walkabout 62 is the ...
Best soft shell rooftop tent for 2 people, the Walkabout series offers LST ,huge side windows, full-size bed comfort, and easy setup for adventurers.
DESCRIPTION
The 23ZERO Walkabout 56 is recogniz...
*In Store Pickup OnlyAll Alu-Cab Tents come with a destination fee of $450 to Michigan. This will be invoiced once you order your tent. For any questions regarding pickup/installation please email ...
*In Store Pickup OnlyAll Alu-Cab Tents come with a destination fee of $450 to Michigan. This will be invoiced once you order your tent. For any questions regarding pickup/installation please email ...
The Kabari XL is a wedge hardshell rooftop tent with even more space: experience superior comfort, ECO13B fabric, and LST for a restful sleep in the wild.
KABARI XL WEDGE HARDSHELL WITH MORE SPAC...
KABARI PRO ALUMINUM CLAM SHELL RTT
So many upgrades!
Adventure awaits with the Kabari PRO, a 5052 fully tig welded aluminum clamshell RTT designed for true adventure enthusiasts. Crafted for ultima...
Enjoy the comforts of home with the Reign Outdoor Off-Suite! Our Off-Suite Privacy tents are great for showering, changing or using a potable toilet.
-600D rip stop waterproof oxford material
-700...
Introducing the Reign Outdoor Windbreaker!
Unfortunately it isn’t a rad 80’s flourescent jacket, but a wind screen to be used with your 270 awning.
-600D oxford ripstop material
-Solid panel, 126”...
Driver’s side Annex rooms are in stock and ready to ship!
Passenger side Annex rooms are OUT OF STOCK!
——————————————————
The Reign Outdoor 270 Awning Wall Kit works with the 270 FR Awning. Availab...
The Reign 270 FR awning is a self supporting 270 degree awning. Easily deployed in under a minute by just one person.
-Powder coated aluminum with stainless steel hardware, including the backside m...
The heavy duty version of our classic awning mounts, designed for 180 and 270-degree awnings. Perfect for Batwing or other similar awnings. Will not work with a rooftop tent.
SOLD AS A SINGLE, NOT ...
An awning mount designed to work with rooftop tents. This mount attaches to the sides of any of our crossbars and sits less than 3/4” above the rack. This bracket has 1 inch of in-out adjustment an...
*Pickup only at Shop (Holland, MI)The Alu-Cab Shower Cube is a modular and universal accessory, designed to interface with all existing Alu-Cab base unit platforms. There are brackets available se...
INFORMATION
Introducing a new awning to the Alu-Cab Shadow Awning range, the 180° Shadow Awning. Once open this free standing awning folds out to be parallel with your vehicle, allowing access to t...
*In store Pickup OnlyINFORMATION
Introducing the 2m 270° Shadow Awning, which is just a tad shorter than our standard 270° Shadow Awning, allowing for applications that needs a smaller awning to al...
*Pickup at shop only (Holland, MI)INFORMATION
Whether you’re exploring the Outback, trekking through Nevada’s Death Valley, or charging red sand dunes in the Kalahari, no camping accessory’s job is...
Discover the best 180 degree overland awning for your adventures at 23Zero. Use our Made Better principles to deliver a quality product that will last the test of time.
Mounts Right or Left
Freest...
Level up your overland experience with the Peregrine PRO 5 arm freestanding 270 degree awning, a great choice for vehicles or teardrop trailers with a hatch or rear galley door. It is a testament t...
Protect yourself from the elements with a Peregrine PRO 6 arm freestanding 270-degree awning. It is a testament to our Made Better principles built with an unwavering dedication to superior qualit...
2 Left in Stock!We designed a hard mount for your new Dometic Go water jug so it doesn't go bouncing when your on those bumpy trails!
Built from 1/8 aluminum, only available in a powder coated matt...
4 Week lead timeWe designed a hard mount for your new Dometic Go water jug so it doesn't go bouncing when your on those bumpy trails!
Built from 1/8 aluminum, only available in a powder coated blac...
In the overland space, a koozie is a practical accessory designed to keep beverages cold while adventuring off-grid. Made from an insulating neoprene, it helps maintain drink temperature and preven...
A spacer that allows you to use the Waterport Quick Release Mount with the Sherpa Window Panels. Keep your Waterport out of the way by mounting it on your window panel, while still allowing it to c...
Make sure you have all the water you need on the trail with these WaterPort mounts. Our mount is designed to work with the WaterPort quick detach mount, or without. It can also be run parallel or p...
The LifeSaver Jerrycan shower attachment has been designed to increase the LifeSaver Jerrycan’s versatility when travelling, it offers an easy fit, instant solution when there is no shower or tap!
...
A robust and portable water purifier capable of filtering 20,000 litres/5,300 US gallons of clean drinking water, removing viruses, bacteria, cysts and parasites instantly. The LifeSaver Jerrycan h...
Our Promise
Tread Lightly
Promoting responsible recreation through stewardship, education and communication. Plus we get out there and live it.
We'll point you in the right direction
Have a question about our products? Our friendly team is standing by to help.
Only the highest quality products
We carefully select and thoroughly test all products we sell so you can be assured of the utmost quality.
I'm completely new to the overland scene. Jeremy made ordering my lift kit super easy and customized it for my exact needs. I'm looking forward to working with New Holland much more.
Dark Waters
Knowledgeable
Jeremy really cares about his clients/customers. He is very knowledgeable in the overlanding community and is only getting better as this lifestyle grows. NHO is a very reliable business and I will continue to use them in the future.
Keith Litteral
Premium Brand
New Holland Overland is a growing business with high potential. The owner, Jeremy, has a get it done attitude and is willing to take on projects from mild to wild. As a professional engineer, I was impressed with his high quality mechanical designs and fabricating craftsmanship. In my experience, its rare to find individuals whom can seamlessly operate in both theoretical and practical domains. I foresee New Holland Overland becoming a premium brand in the Overland industry in the coming years.
Trevor Stark (Vanultra)
Anything & Everything
Jeremy is a great guy to connect with for anything off-roading or overlanding. They have anything and everything you will need to get your vehicle ready for the trails.
Most items are fulfilled within 1-3 business days. For items that have a lead time, it will be posted on that products main page. Further questions regarding lead times please fill out our contact form.
Have no clue where to begin? Or what setup you want to go with that suits your needs/wants? Let's schedule a consultation and we can help figure out where to begin with your adventures! Shoot on over to our contact page and leave us a message
